IBM ThinkPad 各种机型进入BIOS的方法介绍【详细】
ThinkPad model
300
350
500, 510
Action :Enter setup by pressing CTRL+Alt+F3 from a DOS prompt (you must be in DOS mode, not a DOS session under Windows).
========================================================
310, 315
310E/ED
315ED
BIOS Utility is entered by holding F2 while the ThinkPad logo is displayed after power on.
========================================================
365C/CS
365CD/CSD
365E/ED
Enter setup by pressing CTRL+Alt+F11 from a DOS prompt (you must be in DOS mode, not a DOS session under Windows).
365X/XD With the unit powered off, hold the F1 key and power the unit on. Keep F1 held down until Easy setup appears
========================================================
360, 355 series
380, 385 series
560 series
600 series
701C/CS
75x series
76x series
770 series
With the unit powered off, hold the F1 key and power the unit on. Keep F1 held down until Easy setup appears.
NOTE: On the TP 701, you can also access the Configuration area on BIOS by pressing the Fn+F1 keys.
========================================================
240 series
390 series
570 series
i Series 1200
i Series 1300
i Series 1400
i Series 1500
i Series 172x
A20, A21, A22
T20, T21, T22, T23
X20, X21
TransNote
Pressing F1 during startup when the ThinkPad logo is displayed.
========================================================
700/C
720/C
Pressing CTRL+ALT+INS when the cursor moves over to the upper right hand side of the screen right after the memory count.
========================================================
710T
730T
Hold the suspend/resume switch while powering on the computer.